Products
FortelCS A2HD516
Built-in Color
Correction AND Side-Column Keying!
Converter and Frame Synchronizer at a Reduced Price
Features
• Highest quality analog and SD-SDI to HD up
conversion with very good noise reduction and pre-processing
• Proprietary digital sync stripper, digital clamp and digital phase
locked loops lock to extremely noisy inputs down to 0dB SNR
• Up/Cross conversion, Side column keyer with active key fill input
• 8 Analog audio inputs with 24 bit/96kHz A to D conversion • 4 AES
inputs and 2 AES outputs; 3 groups embedding
• De-embedding and processing of all 16 channels of embedded audio
including ALC (Automatic Loudness Control) in 4 user definable
groups
• Seperate synchronizer timing for composite/SD output and HD output
HDMI 1.3 over Single CAT5 Extender AT-HD-V40SRS
Atlona’s AT-HD-V40SRS HDMI 1.3 over Single CAT5 Extender boosts up your
video/audio transmission distance up to 60m (200ft) in HDTV 1080i
format, 40m (130ft) in HDTV 1080p format, and 20m (65ft) in HDTV 1080p
with 36 bit color depth.
MSK
200/S2
The MSK 200/S2 is a compact state-of-the-art signal meter for the
inspection of All Broadcast Signals.
It can be used either in a lab or for the monitoring of
remote-controlled head end systems as well as for final measurements on
antenna and distribution systems.
MER Measurement for all digital modulation types
V-R171-DLW - DUAL LINK / WAVEFORM (DLW) Series (Coming Soon)
Marshall Electronics introduces the new DLW Series to the expanding line of IMD (In-Monitor Display) Monitors. The 17" V-R171-DLW and the 26" V-R261-DLW IMD monitors include Dual Link with Waveform & Vectorscope. These new models incorporate a 10-bit "no compromise" video path along with one of the industry's first monitors equipped with 3G capability. In Quad-View mode, the monitors break the screen into four quadrants and display Audio Bars, a Waveform Monitor, Vectorscope, and live video simultaneously. Both models have two inputs supporting 3G / HD / SDI and Dual Link. A DVI input supports all HDMI modes and DVI to 170MHz.
POINT-HD Worlds most advanced Telestrator Solution
The Nucomm ProQ DTV IFB system offers a cost-effective, high-performance approach to delivering low-latency multiple channel audio IFB communications using a DTV broadcast transmission.
RS-1100
Redundancy Switch
- DVB-ASI
- L-Band
- 70 MHz IF
- SIMPTE (259M-310M)
- Composite Video
ikan V8000HD 8" TFT HD LCD Monitor
$795
CALL US FOR A DEMO!
The V8000HD LCD Monitor is a small versatile High
Definition LCD monitor in a wide screen form factor to match today's
demands for the 16:9 aspect ratio. It supports all the HD standards via
component inputs and also has loop through for all of them.
AJA FS1
Universal SD/HD Audio/Video Frame Synchronizer
and Converter
Featuring a flexible "everything in, everything out" architecture, the
FS1 can simultaneously work with both HD and SD video—all in full 10-bit
Broadcast quality video and 24-bit audio. The FS1 supports virtually any
input or output, analog or digital, HD or SD. The FS-1 can up- or
down-convert between SD and HD, and provide simultaneous HD and SD
outputs. Cross-conversions between HD formats are also supported, with
simultaneous output of both formats. For audio, the FS1 supports
8-channel AES, Balanced analog, or embedded audio with full flexibility.
The FS-1 supports closed captioning and the conversion of closed
captioning between SD and HD formats. The FS-1 is also network ready,
supporting web-based remote control.
| FS1 Panel |
 |
Specifications
Formats
525i625i1080i 50/59.94/60 Hz1080psf 23.98/24 Hz720p 50/59.94/60 Hz
Video Inputs and Outputs
Dual SDI/HD-SDI, SMPTE 259/274/292/296HD component YPbPr/RGB (RGB output only), SMPTE-274SD component/composite/YC (S Video)
Video A/D, D/A
12 bits2x oversampled (HD)4x oversampled (SD)
Audio Inputs and Outputs
8 Channel Balanced, 25 pin D (Tascam pinout)8 Channel AES (BNC)8 Channel SDI/HD-SDI Embedded
Audio A/D, D/A
24 Bits, 48KhzSync
Audio levels
+12dBu, +15dBu, +18dBu, +24dBu, (Full Scale Digital)
LAN
10/100 auto config, auto cable crossoverEmbedded Webserver, HTTP v1.1
GPI
2x GPI input, TTL, isolated2x GPI output, TTL, isolated
Physical
1 RU, 12 inches deep, convection cooled
Power
100-240 VAC, 25 wattsFully Redundant, diode isolated
KTech Telecommunications, Inc.
DVM-2400 IP Gateway
Performance
The DVM-2400 receives GigE, 8VSB RF, Cable QAM RF, or ASI input and
converts the signal into ASI, GigE and NTSC Video. It performs QAM to
GigE conversion. Designed with pluggable modules, GigE, 8VSB, ASI, NTSC
modules are interchangeable per user’s requirements
GigE Input/Output
- Data rate application up to 1250Mbps
- Compliant w IEEE 802.3z draft D5.0 1000BASE-SX Gigabit Ethernet
- SFP connector (Supports both fiber or copper)
- MPEG-2 over IP service (UDP based)
- Configure for IP address, subnet mask, and UDP port number.
- Filtering input packets based on IP address and UDP port number.
- Pluggable
8VSB/QAM Input
- 8VSB/QAM RF input tuner
DVB-ASI Input/Output
- ASI Output card contains 2 BNCs, carrying 1 MPTS each
- Pluggable
Video Decoding (Per Channel Basis)
- MPEG-2 Decoder in compliance with ISO/IEC 13818-1
- MP@ML, MP@LL, and SP@ML 4:2:0 video decoder
- 9.5MBits/Sec max. video bit-rate
- Average TS rate < 120 Mbps
- Pluggable
Audio Decoding
- MPEG-2 PES streams (MPEG-2 audio, MPEG-1 audio, AC-3, or Linear PCM)
- Sample rates supported: 32kHz, 44.1kHz, and 48kHz.
- Handles rates up to 28.5 Mbps
- Pluggable
Secondary Audio Program (SAP)
- Simultaneous Decoding with Primary Audio
- A channel must be dedicated to decode the SAP
User Interface
- Each channel is fully programmable to any IP and UDP port number
- All settings and controls can be viewed and set using an RJ45 Ethernet
on Web Pages. Supports SNMP, FTP, and HTML